Разлики

Тук са показани разликите между избраната и текущата версия на страницата.

--- en:mechanical_assembly [2023/05/05 17:41] – изтрита - външна редакция (Unknown date) 127.0.0.1
+++ en:mechanical_assembly [2023/05/08 11:17] (текуща) – svilen
@@ Ред 1: / Ред 1: @@
+=====Mechanical assembly=====
+The controller CW01R66 consists of two circuit boards - a control board with a display located on the face panel and the [[#relay_board|relay board]] for connecting the control signals.
+To secure the controller to the face panel, there must be cut a rectangular opening for the screen and four mounting holes for the bolts and the studs.
+We recommend the installation of a plexiglass cap that protects the controller from mechanical stress and moisture.
+{{ :wiki:cw01r66_mech_3d.png?nolink |}}
+==== The sizes of the components ====
+{{ :wiki:cw01r66_mech_sizes.png?nolink |}}
+The size of the controller is 86 х 72 mm.\\
+The size of the plexiglass cap is 100 х 85 mm.
+==== Dimensions for mechanical cut ====
+On this drawing are marked the size for the opening for the screen and the mounting holes positions.
+{{ :wiki:cw01r66_mech_window.png?nolink |}}
+==== Relay board ====
+The relay board is 89 х 44 mm and requires 4 mounting holes of ∅3 mm.
+{{ :wiki:cw01r66_mech_relay.png?nolink |}}