Разлики

Тук са показани разликите между избраната и текущата версия на страницата.

--- en:mechanical_assembly [2023/05/07 12:08] – siyana
+++ en:mechanical_assembly [2023/05/08 11:17] (текуща) – svilen
@@ Ред 1: / Ред 1: @@
 =====Mechanical assembly=====
-The controller CW01R66 consists of two circuit boards- a control board with a display located on the dashboard faceplate and [[#relay_board|relay board]] board for connecting the control signals.
+The controller CW01R66 consists of two circuit boards - a control board with a display located on the face panel and the [[#relay_board|relay board]] for connecting the control signals.
-To secure the controller to the dashboard, there must be cut a rectangular opening for the screen and four little mounting holes for bolts and studs.
+To secure the controller to the face panel, there must be cut a rectangular opening for the screen and four mounting holes for the bolts and the studs.
-We recommend the installation of a plexiglass panel that protects the controller from mechanical effects and dampness.
+We recommend the installation of a plexiglass cap that protects the controller from mechanical stress and moisture.
 {{ :wiki:cw01r66_mech_3d.png?nolink |}}
@@ Ред 9: / Ред 9: @@
 {{ :wiki:cw01r66_mech_sizes.png?nolink |}}
 The size of the controller is 86 х 72 mm.\\
-The size of the plexiglass panel is 100 х 85 mm.
+The size of the plexiglass cap is 100 х 85 mm.
-==== Dimensions for expression ====
+==== Dimensions for mechanical cut ====
-On this drawing are marked the size for the opening for the screen and the mounting holes' positions.
+On this drawing are marked the size for the opening for the screen and the mounting holes positions.
 {{ :wiki:cw01r66_mech_window.png?nolink |}}
 ==== Relay board ====
-The relay board is 89 х 44 mm and requires 4 mounting holes ∅3 mm.
+The relay board is 89 х 44 mm and requires 4 mounting holes of ∅3 mm.
 {{ :wiki:cw01r66_mech_relay.png?nolink |}}