Контролери за автомивки

Страницата е само за четене. Може да разглеждате кода, но не и да го променяте. Обърнете се съм администратора, ако смятате, че това не е редно.

=====Mechanical assembly=====
The controller CW01R66 consists of two circuit boards - a control board with a display located on the face panel and the [[#relay_board|relay board]] for connecting the control signals.

To secure the controller to the face panel, there must be cut a rectangular opening for the screen and four mounting holes for the bolts and the studs. 
We recommend the installation of a plexiglass cap that protects the controller from mechanical stress and moisture. 
{{ :wiki:cw01r66_mech_3d.png?nolink |}}

==== The sizes of the components ====
{{ :wiki:cw01r66_mech_sizes.png?nolink |}}
The size of the controller is 86 х 72 mm.\\
The size of the plexiglass cap is 100 х 85 mm.

==== Dimensions for mechanical cut ====
On this drawing are marked the size for the opening for the screen and the mounting holes positions.
{{ :wiki:cw01r66_mech_window.png?nolink |}}

==== Relay board ====
The relay board is 89 х 44 mm and requires 4 mounting holes of ∅3 mm.
{{ :wiki:cw01r66_mech_relay.png?nolink |}}