Инструменти за потребители

Инструменти за сайта


en:list_of_all_parameters

Разлики

Тук са показани разликите между избраната и текущата версия на страницата.

Препратка към сравнението на версиите

Both sides previous revisionПредходна версия
Следваща версия
Предходна версия
en:list_of_all_parameters [2023/08/14 10:44] – [Buttons and relays] siyanaen:list_of_all_parameters [2023/09/22 10:19] (текуща) svilen
Ред 4: Ред 4:
 ====Coin mechanism==== ====Coin mechanism====
  
-==Coins - filtering disturbances==+==Coins - filtering noises==
 After noticing a change in the signal lines of the coin mechanism we wait the given time so that all lines can establish a stable state. After noticing a change in the signal lines of the coin mechanism we wait the given time so that all lines can establish a stable state.
 ==Coins - waiting for the end of an impulse== ==Coins - waiting for the end of an impulse==
Ред 16: Ред 16:
 It decides by which active lines the coin will be recognized with this value. It decides by which active lines the coin will be recognized with this value.
 The ordinary coin mechanism gives an impulse only on one of its six lines according to the way it is programmed to recognize the coins. It is also possible to give impulses simultaneously to a few lines with which it can support a bigger amount of different coins. The ordinary coin mechanism gives an impulse only on one of its six lines according to the way it is programmed to recognize the coins. It is also possible to give impulses simultaneously to a few lines with which it can support a bigger amount of different coins.
-==Minimal impulse==+==Minimum impulse==
 It determines the minimal duration of the impulse on the chosen active lines so that it can be recognized as a coin with this value. If the coin mechanism codes different coins by different durations of the impulses while using the same line, then this parameter will filter out the impulse with the desired duration.  It determines the minimal duration of the impulse on the chosen active lines so that it can be recognized as a coin with this value. If the coin mechanism codes different coins by different durations of the impulses while using the same line, then this parameter will filter out the impulse with the desired duration. 
-==Maximal impulse==+==Maximum impulse==
 It determines the maximal duration of the impulse on the chosen active lines so that it can be recognized as a coin with this value. If the coin mechanism codes different coins by different durations of the impulses while using the same line, then this parameter will filter out the impulse with the desired duration.   It determines the maximal duration of the impulse on the chosen active lines so that it can be recognized as a coin with this value. If the coin mechanism codes different coins by different durations of the impulses while using the same line, then this parameter will filter out the impulse with the desired duration.  
 ==Value== ==Value==
-The value of the recognized coin in st. This parameter is used for informing the user what type of coin he has put in and a statistic of the revolutionof the macchine.+The value of the recognized coin in cents. This parameter is used for informing the user what type of coin is inserted and a statistics.
 ---- ----
  
 ====Buttons and relays==== ====Buttons and relays====
-==Buttons - filtering the disturbances==+==Buttons - filtering the noises==
 After detecting a change in the button input lines, the set time is up for all lines to settle into a stable state. After detecting a change in the button input lines, the set time is up for all lines to settle into a stable state.
 ==Buttons - normally closed outputs== ==Buttons - normally closed outputs==
 The reading of an input impulse occurs when the input is switched from an unconnected state to ground - a normally open contact. By changing this parameter, the action can be reversed - the pulse is registered when switching from a grounded input to an unconnected - normally closed contact. The reading of an input impulse occurs when the input is switched from an unconnected state to ground - a normally open contact. By changing this parameter, the action can be reversed - the pulse is registered when switching from a grounded input to an unconnected - normally closed contact.
-==Relays - normally close outputs==+==Relays - normally closed outputs==
 In an inactive state of the machine all output relays are inactive, turned off, and with open outputs. From this parameter, their state can be reversed. And they are turned on and with closed contact when they are inactive.\\ In an inactive state of the machine all output relays are inactive, turned off, and with open outputs. From this parameter, their state can be reversed. And they are turned on and with closed contact when they are inactive.\\
 (!)All parameters reporting the state of the relays, examine their state as either active or inactive and not as turned off or turned on. Only this parameter sets the connection between active/inactive and turned on/turned off state. (!)All parameters reporting the state of the relays, examine their state as either active or inactive and not as turned off or turned on. Only this parameter sets the connection between active/inactive and turned on/turned off state.
 ==Relays - initial state== ==Relays - initial state==
 The positions of the relays when putting in a coin. Here can be set a mode in which the machine can immediately start working. Or for instance to be turned on additional equipment such as lights. The positions of the relays when putting in a coin. Here can be set a mode in which the machine can immediately start working. Or for instance to be turned on additional equipment such as lights.
-==Waiting for the switching of a relay==+==Delay for the switching of a relay==
 When switching from one mode to another, first all relays connected with the new mode are put in an inactive state. When the given time is up the new state becomes active. When switching from one mode to another, first all relays connected with the new mode are put in an inactive state. When the given time is up the new state becomes active.
-==Reseting the pause after the end of the pause== +==Resetting the pause after the end of the pause== 
-Sets if either the pause of the machine will last an unlimited amount of time or if after a given period of time the put-in credit resets.  +Sets if either the pause of the machine will last an unlimited amount of time or if after a given period of time the credit resets.  
-==Raleys - timekeeping==+==Relays - timekeeping==
 Determines at which relays, if they are in an active state, the charged time decreases. If none of the selected relays are active, timing stops and the remaining time indicator starts flashing. Determines at which relays, if they are in an active state, the charged time decreases. If none of the selected relays are active, timing stops and the remaining time indicator starts flashing.
  
Ред 67: Ред 67:
 The duration of the activity of the relief relay. The duration of the activity of the relief relay.
  
-====Изглед оператор==== +====View operator==== 
-==Оператор фон== +==Operator background== 
-Режим "операторпозволява работата на машината без да е необходимо поставянето на монетиТози параметър задава тип и цвят на фона на екрана.+Mode "operatorpermits the work of the machine without the necessity to put in coinsThis parameter sets a type and color to the background of the screen.
  
-**//За всеки от 16-те реда://**+**//For each one of the 16 rows://**
 ---- ----
-==Текст== +==Text== 
-==Размер== +==Size== 
-==Хоризонтална позиция== +==Horizontal position== 
-==Вертикална позиция== +==Vertical position== 
-==Цвят== +==Color== 
-Изглед "оператордопуска до 16 реда с текстВсеки ред може да има собствен размерцвят и позицияВертикалната позиция може да се задава фино или чрез избор на ред съобразно размера на текста.+View "operatorpermits up to 16 rows with textEach row could have its own sizecolor, and positionThe vertical position can be fine-tuned or by selecting a line according to the size of the text.
 ---- ----
  
-====Изглед авария==== +====View alert==== 
-==Авария фон== +==Alert background== 
-Режим "аварияпривежда машината в неработно състояниеТя спира да приема монети и те биват връщани от монетния механизъмТози параметър задава тип и цвят на фона на екрана. +Mode "alertsets the machine in a nonworking stateIt stops accepting coins and they are returned by the coin mechanismThis parameter sets a type and color to the background of the screen
- +**//For each one of the 16 rows://**
-**//За всеки от 16-те реда://**+
 ---- ----
-==Текст== +==Text== 
-==Размер== +==Size== 
-==Хоризонтална позиция== +==Horizontal position== 
-==Вертикална позиция== +==Vertical position== 
-==Цвят== +==Color== 
-Изглед "авариядопуска до 16 реда с текстВсеки ред може да има собствен размерцвят и позицияВертикалната позиция може да се задава фино или чрез избор на ред съобразно размера на текста.+View "alertpermits up to 16 rows with textEach row could have its own sizecolor, and positionThe vertical position can be fine-tuned or by selecting a line according to the size of the text.
 ---- ----
  
-====Изглед в готовност==== +====View Ready==== 
-==В готовност фон== +==Ready background== 
-Режим "в готовностпоказва че машината е готова за работа и приемане на монетиТози параметър задава тип и цвят на фона на екрана.+Mode "readyindicates that the machine is ready for work and accepts coinsThis parameter sets a type and color to the background of the screen.
  
-**//За всеки от 16-те реда://**+**//For each one of the 16 rows://**
 ---- ----
-==Текст== +==Text== 
-==Размер== +==Size== 
-==Хоризонтална позиция== +==Horizontal position== 
-==Вертикална позиция== +==Vertical position== 
-==Цвят== +==Color== 
-Изглед "в готовностдопуска до 16 реда с текстВсеки ред може да има собствен размерцвят и позицияВертикалната позиция може да се задава фино или чрез избор на ред съобразно размера на текста.+View "readypermits up to 16 rows with textEach row could have its own sizecolor, and positionThe vertical position can be fine-tuned or by selecting a line according to the size of the text.
 ---- ----
  
-====Изглед налични монети==== +====View Available coins==== 
-==Налични монети фон== +==Available coins background== 
-При поставяне на монета се активира изглед "налични монети"Тук се показват натрупаният кредит и времеТози параметър задава тип и цвят на фона на екрана+When a coin is put in it is activated view "Available coins"This is where it is shown the stored credit and timeThis parameter sets a type and color to the background of the screen.  
-==Текст== +==Text== 
-Цвят на текста, стойността и времето на поставените монети+The color of the text and the value and time of the available coins
-==Нови монети== +==New coins== 
-По време на работа на машинатамогат да бъдат добавяни още монетиТе ще бъдат изобразени с друг цвят, като допълнение към първоначалните стойности+During the work of the machinethere could be added more coinsThey will be depicted in another color as an addition to the previous values
-==Изчакване в изглед монети== +==Waiting in View coins== 
-Време през което да се показва този изгледСлед изтичане на времето се преминава към изглед "работа"При поставянето на всяка нова монетаотброяването на времето започва отначало. +The time during which this view is shownAfter the time is up it passes to outlook "work"After each put of a new cointhe timer resets
-==Покажи стойност== +==Show value== 
-==Покажи време== +==Show time== 
-Допълнителни възможности за промяна на режим налични монети. Може за да се избира дали да се показват оставащата наличност и време. +Additional opportunities to change the mode of the available coinsIt can be shown whether the remaining time and value are shown or not.
- +
-====Изглед - работа==== +
-==Работа - фон== +
-Режим "работа" привежда машината в активно състояние, където могат да бъдат избирани различните режими. Този параметър задава тип и цвят на фона на екрана. +
-==Допълнителен цвят 1== +
-При фон, тип "едноцветен" и "вълни" този параметър не се използва. При фон, тип "хронометър" - задава цвета на сектора с оставащо време.  Използва се диагонално преливане на цветовете. Този параметър определя цвета в горния ляв край. +
-==Допълнителен цвят 2== +
-При фон, тип "едноцветен" и "вълни" този параметър не се използва. При фон, тип "хронометър" - задава цвета на сектора с оставащо време.  Използва се диагонално преливане на цветовете. Този параметър определя цвета в долния десен край. +
-==Време== +
-Цвят на индикатора с оставащо време. +
-==Режим== +
-Цвят на текста описващ избраният режим. +
-==Смяна на режим== +
-Цвят на линията показваща превключване от един режим към друг. +
-==Изразходвана пауза== +
-Цвят на линията показваща оставащото време в режим пауза. След изтичане на времето следва нулиране на кредита+
-==Покажи стойност== +
-==Покажи време== +
-Допълнителни възможности за промяна на работния режимМоже за да се избира дали да се показват оставащата наличност и време.+
  
-**//За всеки от 16-те режима//**+====View - work==== 
 +==Work - background== 
 +Mode "work" Puts the machine in an active state, where can be chosen different modes. This parameter sets a type and color to the background of the screen. 
 +==Additional color 1== 
 +For background type "plain" and "waves" this parameter is not used. For background type "chronometer" sets the color of the sector with the remaining time. This parameter sets the color of the upper left corner. 
 +==Additional color  2== 
 +For background type "plain" and "waves" this parameter is not used. For background type "chronometer" sets the color of the sector with the remaining time. It is used a diagonal fade of the colors. This parameter sets the color of the upper left corner. 
 +==Time== 
 +Color of the indicator of the remaining time. 
 +==Mode== 
 +Color of the text for the selected mode. 
 +==Change of the mode== 
 +Color of the line showing the switch from one mode to another. 
 +==Used up pause== 
 +Color of the line showing the remaining time in pause. After the time is up follows reset of the credit. 
 +==Showing value== 
 +==Showing time== 
 +Additional opportunities to change the working mode. It can be shown whether the remaining time and value are shown or not. 
 +**//For each one of the 16 modes//**
 ---- ----
-==Състояние на релетата== +==State of the relays== 
-Текущото състояние на изходните релета определя в кой работен режим е машината и какъв текст ще бъде изведен на екрана+The current state of the output relay sets in which work mode is the machine and what type of text will be shown on the screen
-==Име== +==Name== 
-Име на режима, което ще се изведе на екрана+Name of the mode which will be out on screen
-==Допълнителен цвят 3== +==Additional color 3== 
-При фон, тип "едноцветени "вълнитози параметър не се използваПри фон, тип "хронометър- задава цвета на сектора с изминало време Използва се диагонално преливане на цветоветеТози параметър определя цвета в горния ляв край+For background type "plainand "wavesthis parameter is not usedFor background type "chronometersets the color of the sector with the remaining timeIt is used a diagonal fade of the colorsThis parameter sets the color of the upper left corner
-==Допълнителен цвят 4== +==Additional color 4== 
-При фон, тип "едноцветени "вълнитози параметър не се използваПри фон, тип "хронометър- задава цвета на сектора с изминало време Използва се диагонално преливане на цветоветеТози параметър определя цвета в долния десен край+For background type "plainand "wavesthis parameter is not usedFor the background type "chronometersets the color of the sector with the passed timeIt is used a diagonal fade of the colorsThis parameter sets the color of the bottom right corner
-==Индивидуално време== +==Individual time== 
-Време за работа на машината за един кредит в този режим.+Time of work of the machine for one credit of this mode.
 ---- ----
-==Време за монета== +==Time for a coin== 
-Ако режима не се съвпадне с никой от 16-те кода се прилага това времеЗададеното време е достъпно от системното меню на машината и може да се променя директно.+If the mode does not align with one of the 16 codes it is applied this timeThe given time is accessible from the system menu of the machine and could be changed directly.
en/list_of_all_parameters.1692009847.txt.gz · Последна промяна: 2023/08/14 10:44 от siyana

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki