en:list_of_all_parameters
Разлики
Тук са показани разликите между избраната и текущата версия на страницата.
Both sides previous revisionПредходна версияСледваща версия | Предходна версия | ||
en:list_of_all_parameters [2023/08/14 11:33] – [Изглед - авария] siyana | en:list_of_all_parameters [2023/09/22 10:19] (текуща) – svilen | ||
---|---|---|---|
Ред 4: | Ред 4: | ||
====Coin mechanism==== | ====Coin mechanism==== | ||
- | ==Coins - filtering | + | ==Coins - filtering |
After noticing a change in the signal lines of the coin mechanism we wait the given time so that all lines can establish a stable state. | After noticing a change in the signal lines of the coin mechanism we wait the given time so that all lines can establish a stable state. | ||
==Coins - waiting for the end of an impulse== | ==Coins - waiting for the end of an impulse== | ||
Ред 16: | Ред 16: | ||
It decides by which active lines the coin will be recognized with this value. | It decides by which active lines the coin will be recognized with this value. | ||
The ordinary coin mechanism gives an impulse only on one of its six lines according to the way it is programmed to recognize the coins. It is also possible to give impulses simultaneously to a few lines with which it can support a bigger amount of different coins. | The ordinary coin mechanism gives an impulse only on one of its six lines according to the way it is programmed to recognize the coins. It is also possible to give impulses simultaneously to a few lines with which it can support a bigger amount of different coins. | ||
- | ==Minimal | + | ==Minimum |
It determines the minimal duration of the impulse on the chosen active lines so that it can be recognized as a coin with this value. If the coin mechanism codes different coins by different durations of the impulses while using the same line, then this parameter will filter out the impulse with the desired duration. | It determines the minimal duration of the impulse on the chosen active lines so that it can be recognized as a coin with this value. If the coin mechanism codes different coins by different durations of the impulses while using the same line, then this parameter will filter out the impulse with the desired duration. | ||
- | ==Maximal | + | ==Maximum |
It determines the maximal duration of the impulse on the chosen active lines so that it can be recognized as a coin with this value. If the coin mechanism codes different coins by different durations of the impulses while using the same line, then this parameter will filter out the impulse with the desired duration. | It determines the maximal duration of the impulse on the chosen active lines so that it can be recognized as a coin with this value. If the coin mechanism codes different coins by different durations of the impulses while using the same line, then this parameter will filter out the impulse with the desired duration. | ||
==Value== | ==Value== | ||
- | The value of the recognized coin in st. This parameter is used for informing the user what type of coin he has put in and a statistic of the revolutionof the macchine. | + | The value of the recognized coin in cents. This parameter is used for informing the user what type of coin is inserted |
---- | ---- | ||
====Buttons and relays==== | ====Buttons and relays==== | ||
- | ==Buttons - filtering the disturbances== | + | ==Buttons - filtering the noises== |
After detecting a change in the button input lines, the set time is up for all lines to settle into a stable state. | After detecting a change in the button input lines, the set time is up for all lines to settle into a stable state. | ||
==Buttons - normally closed outputs== | ==Buttons - normally closed outputs== | ||
The reading of an input impulse occurs when the input is switched from an unconnected state to ground - a normally open contact. By changing this parameter, the action can be reversed - the pulse is registered when switching from a grounded input to an unconnected - normally closed contact. | The reading of an input impulse occurs when the input is switched from an unconnected state to ground - a normally open contact. By changing this parameter, the action can be reversed - the pulse is registered when switching from a grounded input to an unconnected - normally closed contact. | ||
- | ==Relays - normally | + | ==Relays - normally |
In an inactive state of the machine all output relays are inactive, turned off, and with open outputs. From this parameter, their state can be reversed. And they are turned on and with closed contact when they are inactive.\\ | In an inactive state of the machine all output relays are inactive, turned off, and with open outputs. From this parameter, their state can be reversed. And they are turned on and with closed contact when they are inactive.\\ | ||
(!)All parameters reporting the state of the relays, examine their state as either active or inactive and not as turned off or turned on. Only this parameter sets the connection between active/ | (!)All parameters reporting the state of the relays, examine their state as either active or inactive and not as turned off or turned on. Only this parameter sets the connection between active/ | ||
==Relays - initial state== | ==Relays - initial state== | ||
The positions of the relays when putting in a coin. Here can be set a mode in which the machine can immediately start working. Or for instance to be turned on additional equipment such as lights. | The positions of the relays when putting in a coin. Here can be set a mode in which the machine can immediately start working. Or for instance to be turned on additional equipment such as lights. | ||
- | ==Waiting | + | ==Delay for the switching of a relay== |
When switching from one mode to another, first all relays connected with the new mode are put in an inactive state. When the given time is up the new state becomes active. | When switching from one mode to another, first all relays connected with the new mode are put in an inactive state. When the given time is up the new state becomes active. | ||
- | ==Reseting | + | ==Resetting |
- | Sets if either the pause of the machine will last an unlimited amount of time or if after a given period of time the put-in | + | Sets if either the pause of the machine will last an unlimited amount of time or if after a given period of time the credit resets. |
- | ==Raleys | + | ==Relays |
Determines at which relays, if they are in an active state, the charged time decreases. If none of the selected relays are active, timing stops and the remaining time indicator starts flashing. | Determines at which relays, if they are in an active state, the charged time decreases. If none of the selected relays are active, timing stops and the remaining time indicator starts flashing. | ||
Ред 67: | Ред 67: | ||
The duration of the activity of the relief relay. | The duration of the activity of the relief relay. | ||
- | ====Outlook | + | ====View - operator==== |
==Operator - background== | ==Operator - background== | ||
Mode " | Mode " | ||
Ред 78: | Ред 78: | ||
==Vertical position== | ==Vertical position== | ||
==Color== | ==Color== | ||
- | Outlook | + | View " |
---- | ---- | ||
- | ====Outlook | + | ====View - alert==== |
- | ==An accident | + | ==Alert - background== |
- | Mode "accident" sets the machine in a non working | + | Mode "alert" sets the machine in a nonworking |
**//For each one of the 16 rows://** | **//For each one of the 16 rows://** | ||
---- | ---- | ||
Ред 91: | Ред 91: | ||
==Vertical position== | ==Vertical position== | ||
==Color== | ==Color== | ||
- | Outlook „accident“ | + | View " |
---- | ---- | ||
- | ====Изглед | + | ====View - Ready==== |
- | ==В готовност | + | ==Ready - background== |
- | Режим | + | Mode "ready" |
- | **//За всеки от 16-те реда://** | + | **//For each one of the 16 rows://** |
---- | ---- | ||
- | ==Текст== | + | ==Text== |
- | ==Размер== | + | ==Size== |
- | ==Хоризонтална позиция== | + | ==Horizontal position== |
- | ==Вертикална позиция== | + | ==Vertical position== |
- | ==Цвят== | + | ==Color== |
- | Изглед | + | View "ready" |
---- | ---- | ||
- | ====Изглед | + | ====View - Available coins==== |
- | ==Налични монети | + | ==Available coins - background== |
- | При поставяне на монета се активира изглед | + | When a coin is put in it is activated view "Available coins" |
- | ==Текст== | + | ==Text== |
- | Цвят на текста, | + | The color of the text and the value and time of the available coins. |
- | ==Нови монети== | + | ==New coins== |
- | По време на работа на машината, могат да бъдат добавяни още монети. Те ще бъдат изобразени с друг цвят, като допълнение към първоначалните стойности. | + | During the work of the machine, there could be added more coins. They will be depicted in another color as an addition to the previous values. |
- | ==Изчакване в изглед монети== | + | ==Waiting in View coins== |
- | Време през което да се показва този изглед. След изтичане на времето се преминава към изглед | + | The time during which this view is shown. After the time is up it passes to outlook |
- | ==Покажи стойност== | + | ==Show value== |
- | ==Покажи време== | + | ==Show time== |
- | Допълнителни възможности за промяна на режим налични монети. Може за да се избира дали да се показват оставащата наличност и време. | + | Additional opportunities to change the mode of the available coins. It can be shown whether the remaining time and value are shown or not. |
- | + | ||
- | ====Изглед - работа==== | + | |
- | ==Работа - фон== | + | |
- | Режим " | + | |
- | ==Допълнителен цвят 1== | + | |
- | При фон, тип " | + | |
- | ==Допълнителен цвят 2== | + | |
- | При фон, тип " | + | |
- | ==Време== | + | |
- | Цвят на индикатора с оставащо време. | + | |
- | ==Режим== | + | |
- | Цвят на текста описващ избраният режим. | + | |
- | ==Смяна на режим== | + | |
- | Цвят на линията показваща превключване от един режим към друг. | + | |
- | ==Изразходвана пауза== | + | |
- | Цвят на линията показваща оставащото време в режим пауза. След изтичане на времето следва нулиране на кредита. | + | |
- | ==Покажи стойност== | + | |
- | ==Покажи време== | + | |
- | Допълнителни възможности за промяна на работния режим. Може за да се избира дали да се показват оставащата наличност и време. | + | |
- | **//За всеки от 16-те режима//** | + | ====View - work==== |
+ | ==Work - background== | ||
+ | Mode " | ||
+ | ==Additional color 1== | ||
+ | For background type " | ||
+ | ==Additional color 2== | ||
+ | For background type " | ||
+ | ==Time== | ||
+ | Color of the indicator of the remaining time. | ||
+ | ==Mode== | ||
+ | Color of the text for the selected mode. | ||
+ | ==Change of the mode== | ||
+ | Color of the line showing the switch from one mode to another. | ||
+ | ==Used up pause== | ||
+ | Color of the line showing the remaining time in pause. After the time is up follows reset of the credit. | ||
+ | ==Showing value== | ||
+ | ==Showing time== | ||
+ | Additional opportunities to change the working mode. It can be shown whether the remaining time and value are shown or not. | ||
+ | **//For each one of the 16 modes//** | ||
---- | ---- | ||
- | ==Състояние на релетата== | + | ==State of the relays== |
- | Текущото състояние на изходните релета определя в кой работен режим е машината и какъв текст ще бъде изведен на екрана. | + | The current state of the output relay sets in which work mode is the machine and what type of text will be shown on the screen. |
- | ==Име== | + | ==Name== |
- | Име на режима, | + | Name of the mode which will be out on screen. |
- | ==Допълнителен цвят | + | ==Additional color 3== |
- | При фон, тип | + | For background type "plain" |
- | ==Допълнителен цвят | + | ==Additional color 4== |
- | При фон, тип | + | For background type "plain" |
- | ==Индивидуално време== | + | ==Individual time== |
- | Време за работа на машината за един кредит в този режим. | + | Time of work of the machine for one credit of this mode. |
---- | ---- | ||
- | ==Време за монета== | + | ==Time for a coin== |
- | Ако режима не се съвпадне с никой от 16-те кода се прилага това време. Зададеното време е достъпно от системното меню на машината и може да се променя директно. | + | If the mode does not align with one of the 16 codes it is applied this time. The given time is accessible from the system menu of the machine and could be changed directly. |
en/list_of_all_parameters.1692012815.txt.gz · Последна промяна: 2023/08/14 11:33 от siyana