Това е стара версия на документа!
Съдържание
Connecting for setting
Changing all available parameters happens via a USB cable which could be connected to a computer (PC and Mac) or Android phone or tablet(with USB OTG transition).
Connecting to a Windows computer
Download the application and install it. Connect to the controller using a micro USB cable. During the initial connection and the startup of the application will be detected the lack of some drivers and it will begin their installation which has to be confirmed. Upon successful connection, the data is read by the controller and becomes available for modification.
Connecting with a Mac computer
Download the application and install it. Connect to the controller using a micro USB cable. Upon successful connection, the data is read by the controller and becomes available for modification. No extra drivers are required.
Connecting to an Android phone or tablet
Download the application and install it. Connect to the controller using a micro USB cable. For phones is needed OTG adapter for the USB port. For each establishment of connection, it appears a message from Android for permission for access to the USB port which needs to be confirmed. Upon successful connection, the data is read by the controller and becomes available for modification.
Main functions of the application
A
Зареждане и запис на текущите настройки на компютъра/телефона/таблета. Служи като архив и готов шаблон за нови контролери.
B
Състояние на връзката с контролера. Показва дали се променят данните на контролера или програмата работи в офлайн режим.
C
Запис на промените в контролера. Всяка редакция се отразява незабавно в текущата памет на контролера и екрана му. Записването в постоянната памет и съхранението им след рестартиране става чрез този бутон.
D
Всички настройки са разделени по групи. Избора на дадена група показва възможните настройки, свързани с нея.