en:list_of_all_parameters
Разлики
Тук са показани разликите между избраната и текущата версия на страницата.
| Both sides previous revisionПредходна версия | |||
| en:list_of_all_parameters [2023/08/17 09:28] – [Outlook - work] siyana | en:list_of_all_parameters [2023/09/22 10:19] (текуща) – svilen | ||
|---|---|---|---|
| Ред 4: | Ред 4: | ||
| ====Coin mechanism==== | ====Coin mechanism==== | ||
| - | ==Coins - filtering | + | ==Coins - filtering |
| After noticing a change in the signal lines of the coin mechanism we wait the given time so that all lines can establish a stable state. | After noticing a change in the signal lines of the coin mechanism we wait the given time so that all lines can establish a stable state. | ||
| ==Coins - waiting for the end of an impulse== | ==Coins - waiting for the end of an impulse== | ||
| Ред 16: | Ред 16: | ||
| It decides by which active lines the coin will be recognized with this value. | It decides by which active lines the coin will be recognized with this value. | ||
| The ordinary coin mechanism gives an impulse only on one of its six lines according to the way it is programmed to recognize the coins. It is also possible to give impulses simultaneously to a few lines with which it can support a bigger amount of different coins. | The ordinary coin mechanism gives an impulse only on one of its six lines according to the way it is programmed to recognize the coins. It is also possible to give impulses simultaneously to a few lines with which it can support a bigger amount of different coins. | ||
| - | ==Minimal | + | ==Minimum |
| It determines the minimal duration of the impulse on the chosen active lines so that it can be recognized as a coin with this value. If the coin mechanism codes different coins by different durations of the impulses while using the same line, then this parameter will filter out the impulse with the desired duration. | It determines the minimal duration of the impulse on the chosen active lines so that it can be recognized as a coin with this value. If the coin mechanism codes different coins by different durations of the impulses while using the same line, then this parameter will filter out the impulse with the desired duration. | ||
| - | ==Maximal | + | ==Maximum |
| It determines the maximal duration of the impulse on the chosen active lines so that it can be recognized as a coin with this value. If the coin mechanism codes different coins by different durations of the impulses while using the same line, then this parameter will filter out the impulse with the desired duration. | It determines the maximal duration of the impulse on the chosen active lines so that it can be recognized as a coin with this value. If the coin mechanism codes different coins by different durations of the impulses while using the same line, then this parameter will filter out the impulse with the desired duration. | ||
| ==Value== | ==Value== | ||
| - | The value of the recognized coin in st. This parameter is used for informing the user what type of coin he has put in and a statistic of the revolutionof the macchine. | + | The value of the recognized coin in cents. This parameter is used for informing the user what type of coin is inserted |
| ---- | ---- | ||
| ====Buttons and relays==== | ====Buttons and relays==== | ||
| - | ==Buttons - filtering the disturbances== | + | ==Buttons - filtering the noises== |
| After detecting a change in the button input lines, the set time is up for all lines to settle into a stable state. | After detecting a change in the button input lines, the set time is up for all lines to settle into a stable state. | ||
| ==Buttons - normally closed outputs== | ==Buttons - normally closed outputs== | ||
| The reading of an input impulse occurs when the input is switched from an unconnected state to ground - a normally open contact. By changing this parameter, the action can be reversed - the pulse is registered when switching from a grounded input to an unconnected - normally closed contact. | The reading of an input impulse occurs when the input is switched from an unconnected state to ground - a normally open contact. By changing this parameter, the action can be reversed - the pulse is registered when switching from a grounded input to an unconnected - normally closed contact. | ||
| - | ==Relays - normally | + | ==Relays - normally |
| In an inactive state of the machine all output relays are inactive, turned off, and with open outputs. From this parameter, their state can be reversed. And they are turned on and with closed contact when they are inactive.\\ | In an inactive state of the machine all output relays are inactive, turned off, and with open outputs. From this parameter, their state can be reversed. And they are turned on and with closed contact when they are inactive.\\ | ||
| (!)All parameters reporting the state of the relays, examine their state as either active or inactive and not as turned off or turned on. Only this parameter sets the connection between active/ | (!)All parameters reporting the state of the relays, examine their state as either active or inactive and not as turned off or turned on. Only this parameter sets the connection between active/ | ||
| ==Relays - initial state== | ==Relays - initial state== | ||
| The positions of the relays when putting in a coin. Here can be set a mode in which the machine can immediately start working. Or for instance to be turned on additional equipment such as lights. | The positions of the relays when putting in a coin. Here can be set a mode in which the machine can immediately start working. Or for instance to be turned on additional equipment such as lights. | ||
| - | ==Waiting | + | ==Delay for the switching of a relay== |
| When switching from one mode to another, first all relays connected with the new mode are put in an inactive state. When the given time is up the new state becomes active. | When switching from one mode to another, first all relays connected with the new mode are put in an inactive state. When the given time is up the new state becomes active. | ||
| - | ==Reseting | + | ==Resetting |
| - | Sets if either the pause of the machine will last an unlimited amount of time or if after a given period of time the put-in | + | Sets if either the pause of the machine will last an unlimited amount of time or if after a given period of time the credit resets. |
| - | ==Raleys | + | ==Relays |
| Determines at which relays, if they are in an active state, the charged time decreases. If none of the selected relays are active, timing stops and the remaining time indicator starts flashing. | Determines at which relays, if they are in an active state, the charged time decreases. If none of the selected relays are active, timing stops and the remaining time indicator starts flashing. | ||
| Ред 67: | Ред 67: | ||
| The duration of the activity of the relief relay. | The duration of the activity of the relief relay. | ||
| - | ====Outlook | + | ====View - operator==== |
| ==Operator - background== | ==Operator - background== | ||
| Mode " | Mode " | ||
| Ред 78: | Ред 78: | ||
| ==Vertical position== | ==Vertical position== | ||
| ==Color== | ==Color== | ||
| - | Outlook | + | View " |
| ---- | ---- | ||
| - | ====Outlook | + | ====View - alert==== |
| - | ==An accident | + | ==Alert - background== |
| - | Mode "accident" sets the machine in a nonworking state. It stops accepting coins and they are returned by the coin mechanism. This parameter sets a type and color to the background of the screen. | + | Mode "alert" sets the machine in a nonworking state. It stops accepting coins and they are returned by the coin mechanism. This parameter sets a type and color to the background of the screen. |
| **//For each one of the 16 rows://** | **//For each one of the 16 rows://** | ||
| ---- | ---- | ||
| Ред 91: | Ред 91: | ||
| ==Vertical position== | ==Vertical position== | ||
| ==Color== | ==Color== | ||
| - | Outlook „accident“ | + | View " |
| ---- | ---- | ||
| - | ====Outlook | + | ====View - Ready==== |
| ==Ready - background== | ==Ready - background== | ||
| Mode " | Mode " | ||
| Ред 105: | Ред 105: | ||
| ==Vertical position== | ==Vertical position== | ||
| ==Color== | ==Color== | ||
| - | Outlook „ready“ permits up to 16 rows with text. Each row could have its own size, color, and position. The vertical position can be fine-tuned or by selecting a line according to the size of the text. | + | View "ready" |
| ---- | ---- | ||
| - | ====Outlook | + | ====View - Available coins==== |
| ==Available coins - background== | ==Available coins - background== | ||
| - | When a coin is put in it is activated | + | When a coin is put in it is activated |
| ==Text== | ==Text== | ||
| The color of the text and the value and time of the available coins. | The color of the text and the value and time of the available coins. | ||
| ==New coins== | ==New coins== | ||
| During the work of the machine, there could be added more coins. They will be depicted in another color as an addition to the previous values. | During the work of the machine, there could be added more coins. They will be depicted in another color as an addition to the previous values. | ||
| - | ==Waiting in Outlook | + | ==Waiting in View coins== |
| - | The time during which this outlook | + | The time during which this view is shown. After the time is up it passes to outlook " |
| ==Show value== | ==Show value== | ||
| ==Show time== | ==Show time== | ||
| Additional opportunities to change the mode of the available coins. It can be shown whether the remaining time and value are shown or not. | Additional opportunities to change the mode of the available coins. It can be shown whether the remaining time and value are shown or not. | ||
| - | ====Outlook | + | ====View - work==== |
| ==Work - background== | ==Work - background== | ||
| Mode " | Mode " | ||
en/list_of_all_parameters.txt · Последна промяна: 2023/09/22 10:19 от svilen